Ultrasonic generators

Apronecs Ltd. produces different types of ultrasonic power supply equipment.

HpP Series open frame ultrasonic generators

Ultrasonic generators type SG xx00 HpP (High Peak Power) are designed to power supply piezoelectric ultrasonic transducers. The generator is produced in a metal box with IP20 protection and is designed for installation in equipment and devices with protection of at least IP54.

Ultrasonic generators type SG xx00 HpP (High Peak Power) ultrasonic generators are a product of Apronecs Ltd. and their design is based on an advanced and improved ultrasonic technology. HpP ultrasonic technology ensures high-frequency ultrasonic fluctuations without dead-zones. It allows power supplying of different piezoelectric acoustic loads – single-resonant or multi-resonant. SG xx00 HpP
generators are fully applicable in a wide range of ultrasonic technology applications – cleaning, sonochemical processes, welding of plastics and metals, cutting, slitting, soldering, textile processing.
Preliminary version of the user manual for this product can be found here.
Software for PC connection of the generators can be found here.

Technical parameters:

Type	SG 300 HpP	SG 600 HpP	SG 1200 HpP
Supply	86V~265VAC 50Hz-60Hz	86V~265VAC 50Hz-60Hz	86V~265VAC 50Hz-60Hz
Maximum input power	400W	700W	1300W
Ultrasonic output	300W	600W	1200W
Frequency range	18~86 kHz	18~86 kHz	18~86 kHz
Peak power ultrasonic	1200W	2500W	5000W
Output voltage	300 to 800Vrms	300 tо 800Vrms	300 tо 800Vrms
Dimensions WxDxH	300х150х200	350×170x220	430×160x260

Desktop ultrasonic generators for different applications

Desktop ultrasonic generators are designed for a wide range of applications - developing new projects, researching of ultrasonic technological processes, laboratory experiments and industrial applications. The ultrasonic generators of this class enable driving of piezoelectric loads with power from 100W to 2000W. The operating frequency setting can be smoothly changed from 19kHz to 46 kHz.
Desktop ultrasonic generators are very suitable for research and new applications because all their characteristics are controllable. The following parameters can be set through a remote control or interface using PC software: operating frequency, feedbacks, frequency changes, different modulations, power, etc. The generators are produced with adjustable inductive compensation. This feature enables driving of acoustic loads with different capacity and frequency.

Technical parameters:

Type	LF	MF	HF
Power supply		230V/ 50Hz
Max input power	700 W	1300 W	1300 W
Ultrasonic output power	300-600W	600-1200W	600-1200W
Ultrasonic.. power	up to 3000W	up to 6000W	up to 6000W
Frequency	17 - 28 kHz	22 - 30 kHz	29 - 46 kHz
Frequency modulation		1Hz to 1
Dimensions LхWхH		160×450x250

Ultrasonic generator modules

The ultrasonic generator modules are designed for driving piezoelectric loads with power 150 W, 300 W, 600 W and 1200 W. The frequency range of 150W, 300W and 600 W generators is from 19 kHz to 46 kHz. There are two types of 1200W generators with two frequency ranges - type LF with frequency range from 19kHz to 35 kHz and HF type with frequency range from 28 kHz to 46 kHz.
Parameter setting of ultrasonic generator modules is also available through a remote control panel or interface by PC software. Piezoelectric acoustic loads of different type or power can be connected to generator’s output. Adjustable inductive compensation enables easy replacement of the ultrasonic load. Parameter setting is easy and does not require special equipment.

Technical parameters:

Type	SG.1200.OF	SG.600.OF	SG.300.OF	SG.150.OF
Power supply	230V/ 50Hz	230V/ 50Hz	230V/ 50Hz	230V/ 50Hz
Max Input Power	1300 W	660 W	330 W	160 W
Output Ultrasonic Power	600-1200W	300-600W	150-300W	50-150W
Ultrasonic … Power	up to 6000W	up to 3000W	up to 1500W	up to 500W
Ultrasonic Frequency	19 - 46 kHz	19 - 46 kHz	19 - 46 kHz	28/40 kHz
Piezoelectric Loads	30-60nf	19-58nf	8,5-28nf	7-11nf
Dimensions LхWхH	160×400x230	160×280x230	160×200x130	180×120x60